Testing & Measurement

TEK SIGNALS SAL OFF SHORE supplies a wide range of Test and Measurement equipment & solutions, covering a wide categories namely: Stand-alone test & instrumentation, Tele-Communication Testing, Data-Communication Testing,  Radio-Communication Testing, Repair & Calibration, ATE Systems, Electrical Testing, Mechanical testing, etc.

Tek Signals deals with wide range of customers, like Network Operators, Equipment Manufacturers, Utility organization, Oil & Gaz sector, System Integrators, Field Support Groups, Installers, Test Houses and End Users.

The Company aims to provide unrivalled products, consultancy and support services covering technologies that include; SS7, ISDN, ANALOGUE, TDM, VoIP, MEDIA, IMS, WIRELESS, MICROWAVE, WiFi/WiMax, 10G/40/100G, FEMTO CELL, PICO & MACRO CELL, ETHERNET, IP, SDH, ATM & OTN, G.FAST, CATV, FIBRE, REPAIR & CALIBRATION,  GENERAL PURPOSE TESTING, ATE.

Telecommunication And Mobile Communication Testing

Test & Measurement Division – Solutions for Telecommunications and Mobile Communications Testing:
We offer a wide range of portable and bench-top telecommunications and data communications test analyzers that measure the performance of services on a variety of interfaces. These testers are used by telecom service providers, enterprise network operators and large corporate network maintenance supervisors and managers alike to control the quality and costs of their networks.


Real Time Spectrum Analyzers

– Real Time Spectrum Analyzers can trigger on a frequency domain event then capture and analyze any pass-band signal that falls within it’s real time bandwidth.
– Multi-domain analysis in frequency, time, code and modulation domains without the need for multiple measurements.
– Extended memory for complete analysis of W-CDMA Signals.
– Frequency Mask Trigger captures single or multiple RF Signals even in the presence of other RF signals that
traditional spectrum and vector analyzers would miss.
– Fast and accurate 2G, 2.5G, 3G measurements. Also features W-CDMA compressed mode that enables analysis of handovers between W-CDMA and GSM, differential I/Q inputs and versatile demodulation capabilities from BPSK to 256QAM.
– Models available: BenchTop 1 Hz – 3 GHz up to 26.5GHz & Handheld 10 kHz – 6.2 GHz.

2y

SiteHawk Antenna And Cable Analyzer

The pocket-sized SiteHawk Antenna and Cable Analyzer operates from 85 MHz to 4 GHz and features an intuitive interface readily accessible to the first time user and minimizes clicks for an expert using it every day. Substantial internal storage eliminates the need to worry about file storage, holding thousands of traces on the device for future analysis or reporting. With the SiteHawk, it is simple to 1) Determine if there is a problem with your cable and antenna system using the Measure Match function and 2) Locate the source of the problem with the Use Distance to Fault measurement.

Standard Accessories:

– AC Adapter (5 Vdc Output)
– Hard Carrying Case
– USB Interface Cable-Power-1 meter long
– RF Cable – 1.5 Meter long
– Instruction Manual
– Soft Carrying Case
– USB Drive
– USB Interface Cable
– 15 cm long
– International Adapter

APPLICATIONS

– Suitable for use in Worldwide Cellular and PCS/DCS systems; supporting measurement of CDMA, GSM, and LTE Protocols.
-Other applications include 3G, Broadcast, Government, Tactical Military, Microwave, Paging, Public Safety, Trunking, WLAN, and TETRA


Cable Testers For Telephone Applications

– Twisted pair and coax testing in a single handheld unit with large backlit display.
– One step setup with automatic and manual instrument control modes.
– 15Km fault location capability, rugged, splash and drip proof, powered from AC Mains or battery, zoom function, short pulse-width option (includes coax testing capability), pair comparison, Splits/Crosstalk modes, Intermittent fault location and measurement of distance to fault in feet, meters or time.
– Configurable for any cable type and Vp, internal storage for 20 waveforms & notes and has on-line tutorials.


Physical Layer Testers / Analyzers

– Layer 1/E1 2Mb Tester
– DSL Loop Qualification Tester
– Wideband TIMS Tester
– Time Domain Reflectometers (TDR)
– Cable Test Equipment


Digital Transmission Testers / Analyzers

– E1/PCM Analyzer
– Jitter/Wander Analyzer
– BERT Tester
– Datacom Analyzer
– PDH/SDH Analyzer for Digital Transmission Network
– STM-0/OC-1, STM-1/OC-3, STM-4/OC-12, STM-16/OC-48
– All SDH/PDH Interfaces upto 2.5Gbit/s
– TCM/APid
– APS/RTD
– TIE & Frequency Measurements


Enterprise Network Solutions


ATM/VoIP Analyzers

– 10/100/1000 Ethernet Analyzer
– LAN/WAN/ATM Analyzers with support for upto STM-16/64
– ATM/VoIP Analyzers
– NGN Testing Solution : H.323, SIP, MEGACO, MGCP, RTP/RTCP
– IP Performance/QoS : Ipv6
– MPLS/GMPLS : RSVP-TE, OSPF-TE, LMP, CR-LDP, BGP-4 etc.
– ATM/IMA
– PNNI/UNI
Features:
– Performance Testing
– Functional Testing
– Conformance Testing
– Interoperability Testing
– Scalability Testing

Access Network Solutions


Analyzers

– ISDN v5.x Analyzers
– xDSL Analyzers
– ADSL, SHDSL & VDSL Installation Test Sets
– ATM and IP Layer Test
– ATM F5 OAM Loopback & Ping Functionality
– Interoperable with Lucent, TI & Alcatel Chipsets
– ITU-T G.992.1, ITU-T G.992.2, ITU-T G.991.2 & More…


Core Network And Mobile Communication Analyzer

– Protocol Analyzer for All Standards, All Layers, All Applications
– K15, Dedicated Monitoring Solution for Mobile Networks/3G
– Fixed Network/SS7
– GSM / GPRS, Deciphering
– MMS/WAP
– EDGE
– UMTS, Iub Deciphering
– CdmaOne / CDMA2000
– Offline Post Processing Tools (K12XX/K15)
– GPRS Performance Analyzer/ QoS
– K1297-G20, Protocol Monitoring, Simulation & Emulation
– Functional Testing
– System and Conformance Testing
– Network Element Emulation ; HLR
– SS7/IN
– GSM/GPRS, MMS/WAP
– IP/SS7, VoIP
– ISDN
– UMTS
– CDMA
– Offline Post Processing Tools with Record Playback & Analysis
– DASY- Digital Multiplexer for E1/DS1 PCM Lines
– Concentrate/Duplicate PCM Signaling Timeslots
– Makes Available Several Signaling TSs to Many Users


Mobile Radio Testing


GSM/GPRS Digital Radio Test Sets

– Easy to use fully integrated test sets optimized for maintenance and servicing of GSM 900, 1800 and 1900 Mobiles.
– Test capability of doing functional tests, transmitter & receiver tests and speech & data tests.
– Fast & accurate, modulation analyzer for alignment and diagnostics, complete set of facilities for battery life evaluation, customer designed test sequences, supports dual band handover.
– “No button start” for ultimate simplicity of operation.
– Fully integrated, soft key driven BTS Test Sets optimized for installation and commissioning, routine maintenance, fault diagnosis and production testing (GSM 900, 1800 and 1900, GPRS and EDGE).


Time And Frequency Synchronization Systems


Synchronization Supply Units

– Network Synchronization Solution-G.811/G.812
– Modular, Flexible, Fully Redundant/Manageable
– Integrated Rubidium/OCXO/GPS Reference


Epsilon Clock- Very High Performance Primary Reference

– ITU-T G.811 GPS PRC- Rubidium
– ITU-T G.811 GPS PRC- OCXO


Broadcast Application

– DVB-T Synchronization Needs
– Redundant GPS Clock With Distribution for Terrestrial DVB
– TV Broadcast with Precision Frequency Offset
– OCXO- Stand Alone


Test And Measurement

– High Performance Portable Rubidium Frequency Reference
– Military Applications
– Redundant Primary Reference Clock
– Naval Clock Equipment
– Synchronization Terminal
– Mobile PRC-Cesium-P/Y Code GPS


Broadband Network Tools


Network Tools

– DSL Network Emulator/Simulator from Broadframe Inc. USA
– ADSL Network Simulator
– Cost-effective ADSL AAL5 Packet Protocol Analyzer
– Powerful In-Line Protocol Analysis
– DSL Protocol Support
ATM AAL5 Packet Over ADSL
RFC 1483/2684 LLC SNAP
RFC 2364 PPPoA VC MUX
RFC 2364 PPPoA LLC NLPID
RFC 2516 PPPoE
PPP LCP, CHAP, PAP and Related Protocols
Other Decodes


Applications

CPE Product Development
ADSL Interoperability & Conformance Testing
Performance Analysis
Demonstrate DSL Equipment Virtually At Any Location
Functional Verification of CPE Products


DSL Test Equipment From Sparnex N.V. Belgium

– xDSL Line Simulator
– Based on Unique ACC (Active Analog Concept) & CNB
– Bandwidth up to 4.5 MHz
– HDSL, ADSL, SDSL and SHDSL
– Support ADSL2+ on Same Platform


Test And Measurement

– High Performance Portable Rubidium Frequency Reference
– Military Applications
– Redundant Primary Reference Clock
– Naval Clock Equipment
– Synchronization Terminal
– Mobile PRC-Cesium-P/Y Code GPS
– Ten Times More Accurate than Passive Simulator (better than 0.5dB at 1MHz)
– ITU, ANSI, ETSI and Bellcore Standards
– Simulation of Different Kinds of Noise On the Line


Mobile Radio Testing


GSM/GPRS Digital Radio Test Sets

– Easy to use fully integrated test sets optimized for maintenance and servicing of GSM 900, 1800 and 1900 Mobiles.
– Test capability of doing functional tests, transmitter & receiver tests and speech & data tests.
– Fast & accurate, modulation analyzer for alignment and diagnostics, complete set of facilities for battery life evaluation, customer designed test sequences, supports dual band handover.
– “No button start” for ultimate simplicity of operation.
– Fully integrated, soft key driven BTS Test Sets optimized for installation and commissioning, routine maintenance, fault diagnosis and production testing (GSM 900, 1800 and 1900, GPRS and EDGE).


Microwave Frequency Synthesizing And Testing


Microwave Synthesisers

– Features Fast Frequency Switching, Low Phase Noise, Faster to program, simpler to operate and wave maker software.
– Available Options; Step attenuator, high stability 10 MHz reference, 0.1 Hz resolution, analog frequency and power sweep, GPIB interface.
– Models available with built-in function generators for generating AM, FM and pulse (option). 60dB Scan modulation is also available as an option.
– Available Frequency Ranges; 10MHz to 8GHz, 10MHz to 20 GHz, 10 MHz to 40 GHz.


Power Meters

– Accurate and fast measurement of CW, peak and average power from 10MHz to 40GHz. Measured Power range is –70dBm to +47 dBm depending on the power sensor used.
– Single and Dual input models


Microwave Frequency Counters

– Fastest 250k measurements/s to internal memory and 2k/s via GPIB.
– 14 Digits display with 12 digits freq. Resolution.
– Frequency range: 300MHz standard, 3, 8 and 14GHz optional.
– Multi-parameter display and graphical presentation of results. USB and GPIB standard.
– Outstanding performance/price ratio.
– Microwave Frequency Counters also available with built-in power meter and provide simultaneous measurement of both power and frequency. No external mixers or power sensors are required. Frequency range: 10Hz to 12.4/20/26.5/40/46/60GHz.